Beta

Download the DCC Box beta

Try DCC Box on your own layout before it goes on sale on Monday 1 February 2027. Tell us where to send it and the download links come straight to your inbox: one for Windows, one for the Raspberry Pi.

The beta isn't quite ready to download yet. Your link will work as soon as it is: keep the email, and try it again in a day or two.

This is a beta. It's free to use, with your own command station, until 12:00 (UK time) on Monday 8 February 2027. After that DCC Box needs a licence: without one it runs in demo mode, on a pretend layout, until you enter one. DCC Box will only be available from model shops with a physical store, whether you buy in person or online.

A beta can still have rough edges. If you find one, please tell us at hello@dccbox.com.

What you need

  • A Windows PC: Windows 10 or 11, 64-bit. DCC Box runs in the background, so the PC needs to be on while you run trains.
  • Or a Raspberry Pi 3, 4 or 5, running Raspberry Pi OS, 64-bit (Bookworm or later). The Lite edition is enough.
  • A command station DCC Box drives: a YaMoRC YD7010 or a SPROG 3 (see what each can do). Without one, DCC Box has a pretend layout to try everything on.
  • Tablets or phones on the same network, as the control panel. Nothing to install on them: they use their web browser.

Installing

Windows

  1. Press Download for Windows in the email, then open the file.
  2. The beta isn't signed yet, so Windows may say it protected your PC. Choose More info, then Run anyway.
  3. Follow the steps. DCC Box starts by itself, and its icon appears by the clock.
  4. Open http://dccbox.local in a browser on any computer, tablet or phone on the same network.

Raspberry Pi

  1. Open a terminal on the Pi (or connect to it with SSH).
  2. Copy the one-line command from the email, paste it in and press Enter. Type the Pi's password if it asks.
  3. It downloads DCC Box, checks it and installs it. At the end it shows the address to open, such as http://raspberrypi.local.

To install by hand instead, use download the files in the email, then:

sha256sum -c dccbox-*.tar.gz.sha256
tar -xzf dccbox-*-arm64.tar.gz
sudo bash dccbox/install.sh

(The checksum file is beside the download: add .sha256 to its address.)

Updating

On a Raspberry Pi, DCC Box updates itself: Settings → System → Updates says when there's a new version and installs it with one press, or overnight if you let it. On Windows, use the link in your email again: it always fetches the newest version, which installs over the old one. Your railway is kept either way.

If something goes wrong

The email hasn't arrived
Look in your spam or junk folder. If it isn't there, ask again above (up to three times a day).
http://dccbox.local doesn't open
Some phones and tablets don't find .local names. Use the computer's address instead: DCC Box's icon by the clock shows it on Windows; on a Pi, the install shows it at the end. Check the tablet is on the same network (not a guest network).
The Pi says it's 32-bit Raspberry Pi OS
DCC Box needs the 64-bit edition. Put it on the card with Raspberry Pi Imager, then run the command again.
Anything else
Write to hello@dccbox.com and say what you saw. A screenshot helps.